Unique and Functional
Adopting an asymmetry mesh as a front panel, APOLLO M1 provides not only a unique look but also maximum air flow through the case.
With two extremely large 200mm ARGB fans, APOLLO M1's fans are effective at building up air flow and cooling down interal components. Enormous fans simultaneously satisfy the pursuit of cooling efficiency and the satisfaction of having two 200mm ARGB fans.
To satisfy PC builders' and gamers' crave for more RGB, each I/O port is surrounded by neo chrome streaming light with more than 20 lighting effects.
One Click, Sync All
APOLLO M1 supports connection to compatible motherboards (5v 3-pin) to achieve system-wide RGB lighting synchronization, makes it easier to unite your case from RGB chaos to pleasing visual effects.
Power Supply Cover Design
Building upon inner beauty of the case, a vented power supply shroud at the bottom of the case surrounds the PSU with cutouts displaying the side of the PSU.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the APOLLO M1 to minimize dust entering the case. With magnets holding the filter to the case, makes it easy to remove and clean the washable dust filter.
Seamless Tempered Glass
To build a minimalistic style, the side tempered glass is inserted from the back of case, leaving thumb screws to hold the tempered glass in place. A cleaner design displaying the internal components of the PC.
Light It Up, Speed It Up
A single easy push button, controls the 2 ARGB fans and lights surrounded the I/O port, cycling though the different effects and LED off. Another button controls the fans; high, mid, and low speed, whichever suites your cooling needs.
APOLLO M1 Overview
"Spectacular and Breath-taking"APOLLO M1 is a mid-tower case with asymmetry mesh front panel and two extremely large RGB lighting dual ring fans on the front. With this design, the pursuit of high heat dissipation, increase air flow, and eye catching design is achieved.
- Asymmetry Mesh Design
- 2 Built-in 200mm Dual Rings ARGB Fans
- I/O Front Panel With ARGB Streaming Lighting
- ARGB Sync Via Motherboard
- Power Cover Design
- Magnetic Dust Filter
- Seamless Tempered Glass Window
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
- Selectable High/Mid/Low Fan Speed
|Product Name||APOLLO M1|
|Case Type||MID Tower|
|Motherboard Support||ATX, Micro-ATX, Mini-ITX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support||Top: 280 mm
Front:360 mm, 280 mm
|Fan Support||Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 2 x 140mm , 2 x 200mm
Rear: 1 x 120mm, 1 x 140mm
Bottom: 2 x 120mm
|Pre-installed Fans||Front: 2 x 200mm Dual Rings ARGB Fans|
|Drive Bays||2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage)
1 x 2.5"
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED control x1, Fan Speed control x1|
|Clearance||CPU cooler height limitation: 170mm
VGA length limitation: 330mm
PSU length limitation: 170mm
|Dimension(LxWxH)||410 x 215 x 485 mm|
|Net Weight||5.97 kg / 13.2 lb|